EShops 75G Hang-on Protein Skimmer

CODE: CG82855

$139.90

In Stock

EShopps PSK-75H Hang-On Protein Skimmer

Easy-to-install and affordable protein skimmer for marine aquariums

Hang-on skimmer with features found in high-end protein skimmers

Hang-on model allows convenient installation on your saltwater aquarium

The EShopps PSK-75H Hang-On Protein Skimmer combines performance and easy installation. Eshopps protein skimmers are designed with simplicity in mind to satisfy the skimming needs of saltwater aquarium hobbyists. The included pump features a needle-wheel impeller that vigorously mixes air and water to create a flurry of waste-removing bubbles. The PSK-75H will improve water quality and oxygen levels in saltwater aquariums. The removable collection cup allows convenient skimmer maintenance and disposal of collected waste material. The adjustment knob fine-tunes water level within the protein skimmer reaction chamber for optimal performance. Quality acrylic construction.

Hobby-level hang-on skimmer boasts performance and easy installation. Eshopps protein skimmers are designed with simplicity in mind to satisfy the skimming needs of saltwater aquarists with a bit of aquarium "know-how." Included pump features a needle-wheel impeller that vigorously mixes air and water to create a flurry of waste-removing bubbles. Improves water quality and oxygen levels in saltwater aquariums.

Eshopps Hang-On Protein Skimmer features a removable collection cup for convenient skimmer maintenance and disposal of collected waste material. Adjustment knob fine-tunes water level within the protein skimmer reaction chamber for optimal performance. Quality acrylic-construction.


Features:

  • Designed to hang on the back of the tank
  • Dimensions: 3" Diameter, 23" Tall
  • Footprint: 7" X 6"
  • Recommended tank size: Up to 75 gallons

Note: Turn off protein skimmer prior to feeding or supplementation. Wait 30 to 45 minutes before turning protein skimmer back on to minimize excess/wet foam production.

Note: Please ensure proper placement and positioning of gasket and impeller during maintenance for proper operation.

Set Up for Hang-on Protein Skimmer:

  • Hang skimmer on back of the aquarium.
  • Get a cup to fill main body with water up to the middle.
  • Bend the air intake hose so no air can get through.
  • While bending the hose, plug the electric cord into the wall. Wait until the water level reaches almost to the neck and then release the air hose. The skimmer should start running by now.
  • Water level can be adjusted by using the adjusting knob. Note: IF the water level is too high, it will cause the skimmer to overflow.

Maintenance:

Clean the pump and air intake adaptor every 2 to 3 months to prevent calcium build up.

To ensure that a person, not an automated program, is filling this form, please enter the characters you see in this picture. All letters will be shown in their capitalized form.

No posts found

Loading...
Up