American Marine Pinpoint ORP Probe
The PINPOINT® ORP Replacement Probe is designed especially with your purpose in mind. It features long, continuous duty expectancy, fast response and, most importantly, is non-toxic to your system. Each probe features a 10 foot cable with a high interference suppression jacket, Ag-AgCl reference, and is 99.9% pure platinum.
- 10 foot cord
- BNC connector
- Platinum wire sensor
- Ag-Ag/Cl reference
- Extended life
- High supression cable jacket
Maintenance: Clean the probe tip frequently (every 3 ~ 4 weeks) using a soft toothbrush. Push the probe tip down into the wet bristles and rotate the probe 3 ~ 4 times. This will clean the inner surfaces of the probe as well as the sensing glass and reference junctions. Most probes will last 12?18 months (continuous duty). They should be replaced once they cannot be calibrated. Check calibration monthly to verify your readings and refer to your owners manual for directions and specification on each monitor/controller.
